AGPtek 60m HDMI Network Extender Over Single Cable with IR ,Cat5e/6 Ethernet Cable 3D&1080P Supported Compatible HDCP Full HD Transmission
||Amazon (FBA or FBM)
Description: - The HDMI extender over a single UTP cables with IR control is the right way to send your HDMI signal over long distances. - Instead of using expensive HDMI cables, this device lets you use your existing Cat5e/ 6 cables/sockets while also performing the same functions like transferring Deep Color video and new lossless compressed audio. - And if that weren't enough, you can use your existing remote to control your device through an IR blaster. Specification: * HDMI signal: Compatible HDCP * Resolution supported: 480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz * Network cable: Low resistance and consumption oxygen-free copper core(CAT6, CAT6A, CAT7) * Transmission length: CAT6:60m at 1080P * IR remote control: Support 20~60KHz wide frequency IR remote control * Working temperature: 0°C~60°C * Power: DC5V/1A 2pcs * Power consumption: TX:2W; RX Installation Requirements: 1. HDMI source device(computer graphics card, DVD,PS3, HD monitoring equipment etc). 2. HDMI display device like SDTV, HDTV, projector with HDMI port. 3. UTP/STP cat6/6A/7 cable, follow standard IEEE-568B. Note: 1.High quality cat6 or cat6e cable is needed to work with this hdmi extender 2.Only supports the PCM audio output Package Contents: 1 x HDMI to RJ45 sender TX 1 x RJ45 to HDMI receiver RX 2 x DC5V/1A 1 x User manual 1 x IR blaster extension cable 1 x IR receiver extension cable AGPtek® - is a registered trademark protected by the US Trademark Law.AGPtek® products are sold by authorized sellers only.