Campaign Details
BÖHM B66 Wireless Bluetooth Over Ear Headphones with Active Noise Cancellation and Inline Microphone - Black/Silver
Campaign ID: |
C118434 |
Categories: |
Music
,
Gadgets
|
Shipping Method: |
Send Product via Shipping Carrier |
Shipping Carrier: |
USPS |
Product Details
Color:Black Bluetooth Connection Quick Guide - First make sure the B66 Headphones are charged and then open the Bluetooth function on your Phone/Tablet and then press and hold the MFB Button, (the Large Button,) on the Left Headphone of the B66. As you hold it you will first hear a multi note ascending tone which signals that the B66 are powered on. As you keep holding down the button a couple seconds longer your will hear a short double beep. This will signal that the B66 are now in pairing mode. (You will also see the light on the Left headphone alternating Blue/Red.) If you check your Phone/Tablet Bluetooth Function you should now see “B66” as an option. Tap on that and the B66 should connect. Noise Cancellation Ability – To activate, push the ANC button (on the outside of the Right Headphone) to the “Up” position. Also, Active Noise Cancelling will not eliminate all surrounding noise. Most low frequency general noise around you will be eliminated by the waves created by ANC; However, ANC does not work as completely on high frequency sharp noises, so you may hear some of the higher, sharper sounds around you. Noise Cancellation Function – Due to the waves created in Active Noise Cancellation you may hear some soft humming or fuzzy static when you have no audio playing or when you have the audio extremely loud. PLEASE NOTE – Take care adjusting the Headphones as severe manipulation of the Headphones can damage them