YOVDA Wireless Switch Pro Controller for Nintendo, DinoFire, Turbo and Dual Vibration Remote Gamepad Joystick with Gyro axis Console Campaign

Social Deal

Campaign Prerequisites
  • United States    

Campaign Details

YOVDA Wireless Switch Pro Controller for Nintendo, DinoFire, Turbo and Dual Vibration Remote Gamepad Joystick with Gyro axis Console

Campaign ID: C143778
Categories: Gender Neutral
Shipping Method: Amazon (FBA or FBM)
Shipping Carrier: USPS
Retail Price: $27.99 FREE

Product Details
Color:BLACK 1.Handle operationpress and hold the HOME button for 3 seconds to power on and enter pairing. LED1-4 flashes quickly. The pairing is successful, and the corresponding channel light assigned by the Switch host is always on. Connect again, short press the HOME button to power on and enter the connection, LED1-4 flashes slowly, pairing is successful, and the corresponding channel light assigned by the Switch host stays on. 2.Chargingwhen the handle is inserted into the adapter, LED1-4 flashes, and when full, LED1-4 turns off. The handle is online. When the handle is plugged into the USB, the corresponding channel light flashes slowly and stays on when it is full. 3.Low battery alarmWhen the battery voltage of the handle is lower than 3.6V (according to the principle of battery characteristics), the corresponding channel light flashes slowly, indicating that the handle is low and needs to be charged. 4.shutdownWhen the joystick is on, press and hold the HOME button for 5 seconds to turn off the joystick; when the joystick is on-line, if there is no key operation for 10 minutes, it will automatically shut down. 5.About upgradingThe controller can be directly upgraded without driver USB. 6.Reset functionWhen the handle is abnormal, it can be reset by pressing the reset button on the back of the handle. 7. Acceptance distanceThe receiving distance of the handle can reach 8-10M. 8.About PC wired modeHold down the "+" key and connect to the PC with a USB cable. The LED1 and LED3 will stop blinking after the second light stays on, indicating that the Dinput mode has been entered. Press the HOME button for 3 seconds to switch Xinput mode turns to the third light. 9.Basic parameters of the handle: Built-in polymer lithium battery 500mAh Gaming Time: Approx. 6-8 h / Standby Time: Approx. 25 days / Charging Time: Approx. 2 hours Charging interface: TYPE-C

Our coders are busy tuning caffeine and pizza into a mobile-friendly Tomoson by 1/1/2017

For Now View Tablet Optimized Version

Please wait

This may take a while, please wait...